The ariel was made out of different thicknesses of evergreen rod. Very simple but tricky to put together.
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Followers
Blog Archive
-
▼
2008
(31)
-
▼
December
(29)
- Well thats the end of this project for now, will g...
- No title
- No title
- Boat research
- Nearly Finished Boat
- The hull is two different colours, dark green and ...
- When the pieces were finished I simply sprayed the...
- Paint Job
- I decided not to do this as when i had a go it di...
- I filled the gaps with filler and then placed a cu...
- When the hull was finished on the CNC machine I st...
- The Hull
- No title
- The triangle shape that the ariel will be attache...
- No title
- These rope ties were very straight forward to make...
- On my first attempt of making a mold went wrong, ...
- This was just a simple box with one slanted side. ...
- Here is all the detailing finished on the cabin.
- I glued the middle of the windows in after I made ...
- Here I made the detailing and trap door out of sty...
- Here I put fine stripes of styrene around the wind...
- Once I had made the main bulk of the cabin I could...
- No title
- No title
- On certain parts of the roof I just just stuck th...
- Again the front windows were difficult to make an...
- The windows were quite tricky to do as they were ...
- I made the top cabin by hand out of styrene. I di...
-
▼
December
(29)
1 comment:
Visit this blog. Thank you!
Post a Comment